| E01 |
Water inlet fault – Dishwasher can’t fill properly |
- Ensure water supply is on
- Check inlet hose for kinks or blockages
- Inspect inlet valve
|
| E02 |
Drainage fault – Water not draining properly |
- Clean the drain filter
- Check drain hose for blockages
- Inspect drain pump
|
| E03 |
Heating fault – Water not heating correctly |
- Check heating element
- Test thermostat
- Replace faulty components
|
| E04 |
Overfill/Leakage – Too much water detected |
- Inspect water level sensor
- Check for leaks around the door
- Ensure proper water pressure
|
| E05 |
Motor fault – Wash motor issue |
- Verify motor operation
- Replace if faulty
|
| E06 |
Door lock issue – Problem with door latch |
- Inspect door lock mechanism
- Check latch alignment
- Replace faulty lock
|
| E07 |
Turbidity sensor fault – Water clarity sensor issue |
- Clean the sensor
- Check wiring connections
- Replace sensor if needed
|
| E08 |
Diverter valve fault – Water distribution issue |
- Inspect diverter valve
- Ensure valve is not stuck
- Replace faulty components
|
| E09 |
Heating system fault – General heating problem |
- Check heating element
- Inspect connections
- Replace damaged parts
|
| E10 |
Circulation pump fault – Water not circulating properly |
- Inspect circulation pump
- Clean impeller
- Replace if defective
|
| E11 |
Drying system fault – Drying fan issue |
- Check drying fan operation
- Inspect heating element
- Replace faulty parts
|
| E15 |
Leakage detected – Anti-flood system triggered |
- Inspect for leaks under dishwasher
- Fix leaking pipes or hoses
- Ensure proper drainage
|
| E22 |
Blocked filter or spray arm – Water flow issue |
- Clean dishwasher filter
- Ensure spray arms are free of debris
|
| E25 |
Drain pump problem – Pump failure affecting drainage |
- Clean and inspect drain pump
- Replace if necessary
|
