LG Dishwasher Troubleshooting Codes

LG Dishwasher Troubleshooting Codes Made Simple!

Uh-oh! Is your LG dishwasher throwing out a mysterious error code? Don’t worry you’re not alone, and we’re here to help you decode those little messages so you can get your dishwasher back to sparkling dishes in no time!

Most of these codes are like a secret language that your dishwasher uses to say, “Hey, I need a bit of attention here!” The good news? You don’t have to be a repair expert to understand what they mean. Let’s break it down together.

Common LG Dishwasher Error Codes (And What to Do About Them!)

Error Code	Problem	Solutions
OE	Drainage Issue	Check drain hose for kinks or clogs Remove and clean the filter Verify kitchen sink drain is clear Pro Tip: Avoid overloading with saucy dishes to prevent clogs
LE	Motor Overload	Power cycle the dishwasher Check spray arms for blockages Contact professional if issue persists
IE	Water Supply Problem	Check water supply valve Inspect inlet hose for bends/clogs Clean water inlet filters Verify adequate water pressure
HE	Heating Problem	Reset the dishwasher Run a test cycle Contact technician if issue persists Expert Tip: Run hot water at sink before starting cycle
FE	Water Overflow	Turn off power immediately Check float valve movement Call professional if needed
tE	Thermistor Problem	Reset the dishwasher Ensure proper loading Professional service likely needed
CE	Overcurrent Error	Power reset the system Plug directly into outlet (no extension cords)

1. OE Error Code – Drainage Issue

This one pops up when the dishwasher isn’t draining properly. Nobody likes standing water at the bottom of their machine! Here’s how to troubleshoot it like a pro:

• Check the Drain Hose: Make sure the drain hose isn’t kinked or clogged with debris. A quick inspection might reveal an easy fix.
• Inspect the Filter: Your dishwasher filter might be clogged with food bits. Remove it and give it a good rinse under warm water.
• Run Water Through the Sink Drain: Sometimes, the issue isn’t the dishwasher but the kitchen drain. Make sure that’s clear too!

Pro Tip: Avoid overloading the dishwasher with saucy dishes those extra leftovers can clog things up!

2. LE Error Code – Motor Overload

The LE code signals that the motor is under stress, which happens when something obstructs it. Here’s what to do:

• Turn It Off and On Again: Yep, the golden rule of troubleshooting! Unplug the dishwasher or flip the breaker for a couple of minutes to reset it.
• Check the Spray Arms: Make sure nothing (like a pesky spoon) is blocking the spray arms from spinning freely.
• Call for Backup: If the LE code sticks around after these steps, it might mean the motor needs professional care.

3. IE Error Code – Water Supply Problem

This code means your machine isn’t getting enough water. No water, no dishwashing magic! Here’s how to fix it:

• Inspect the Water Supply Valve: Make sure the valve is open and supplying water.
• Check the Hose: If the water inlet hose is bent or clogged, it may block the flow. Straighten it out or clean it as needed.
• Clean the Filters: Remove and rinse the small mesh filters at the water inlet connection.

If none of this works, you may want to check your home’s water pressure it might be too low for the dishwasher to fill properly.

4. HE Error Code – Heating Problem

When the HE error shows up, it means there’s a hiccup with the dishwasher’s heating system. While this may sound intimidating, it isn’t always a big deal:

• Reset the Dishwasher: A quick power reset can sometimes clear this issue.
• Run a Test Cycle: If it happens again, the issue might be with the heating element, and a service technician will need to have a look.

Expert Tip: Use warm or hot water at the sink before starting your cycle it gives your dishwasher a head start!

5. FE Error Code – Water Overflow

This code signals too much water inside the dishwasher. Time for damage control!

• Turn It Off Immediately: Prevent further water overflow by cutting the power.
• Inspect the Float Valve: The float valve might be stuck. Gently move it to check if it’s working properly.
• Call for Help: If the problem persists, a faulty internal valve might need professional attention.

6. tE Error Code – Thermistor Problem

This one’s all about temperature, and it generally requires a tech fix. But here’s what you can try first:

• Reset the Dishwasher: Unplug it for a few minutes and then plug it back in.
• Avoid Overcrowding: Make sure you’re not blocking airflow in the unit with too many dishes.

7. CE Error Code – Overcurrent Error

This could happen if the dishwasher’s motor experiences some electrical issue. Here’s what to do:

• Power Reset: Unplug the machine or flip the circuit breaker to reset the system.
• Stop Using Extension Cords: If you’re using one, plug the dishwasher directly into a power outlet.

Still Stuck? Don’t Panic!

If you’ve tried everything and the error code just won’t leave, it’s totally okay to call in the pros. LG’s customer support and certified technicians are always ready to lend a hand. Be sure to have the error code and your model number handy when you call it’ll speed things up.

How to Prevent Future Errors

Want to keep your LG dishwasher running smoothly? Here are some quick tips:

• Clean the filter regularly to avoid clogs.
• Don’t overload your machine give those dishes some space to breathe!
• Pre-rinse lightly to remove stubborn food bits before loading.
• Run a cleaning cycle with dishwasher cleaner once a month to clear away grease and limescale buildup.

Wrapping It Up

Your LG dishwasher is an impressive piece of technology, but even the best machines need a little love now and then. With this trusty guide, you’ll have those error codes sorted faster than you can say “sparkling clean dishes.”

Did we save your day? Leave a comment below or share this guide with a friend who could use a helping hand! Cheers to hassle-free dishwashing!