| Water Inlet Problems |
Insufficient water flow, clogged inlet valve, low water pressure |
E01, F1, i10, “Fill Fault”, “Water Supply Issue” |
Ensure water supply is on, clean inlet filters, and inspect hoses for blockages |
| Drainage Issues |
Water not emptying, blocked drain filter, faulty drain pump |
E02, F2, d10, “Drain Fault”, “Pump Obstruction” |
Clear drain hose, remove debris from filter, check pump function |
| Washing/Circulation Problems |
Spray arms not spinning, blocked nozzles, motor failure |
E03, F3, c10, “Wash Motor Fault”, “Circulation Issue” |
Inspect and clean spray arms, check motor operation |
| Heating Problems |
Dishwasher not heating, faulty heater, temperature sensor issue |
E04, F4, h10, “Heating Fault”, “Temperature Sensor Issue” |
Contact a technician for heating system diagnosis and repair |
| Sensor Errors |
Malfunctioning water level sensor, temperature sensor issues |
E05, F5, s10, “Sensor Fault”, “Level Sensor Error” |
Seek professional assistance for sensor replacement |
| Electrical/Electronic Issues |
Power supply faults, control board issues, loose wiring |
E06, F6, e10, “Control Board Fault”, “Power Supply Error” |
Qualified technician required for electrical repairs |
| Door/Lock Problems |
Door not closing properly, latch malfunction |
E07, F7, L10, “Door Lock Fault”, “Door Not Secured” |
Ensure the door is shut firmly, inspect the locking mechanism |
| Other/Unclassified Issues |
General system malfunctions |
E99, “Fault” Indicator |
Refer to the user manual or contact Kenwood support |
