| E1 |
Water Inlet Fault |
Dishwasher isn’t filling |
Check water supply, inlet valve, and hose. |
| E2 |
Drainage Fault |
Water isn’t draining |
Clean filter, check drain hose, and inspect pump. |
| E3 |
Heating Fault |
Water isn’t heating |
Test heating element and thermostat. |
| E4 |
Overflow/Leakage |
Too much water or a leak detected |
Check water level sensor, inlet valve, and hoses. |
| E5 |
Motor Fault |
Issue with wash motor |
Check motor functionality, replace if faulty. |
| E6 |
Pressure Switch Fault |
Water level detection issue |
Test and replace the pressure switch if needed. |
| E7 |
Turbidity Sensor Fault |
Water clarity sensor issue |
Clean or replace the turbidity sensor. |
| F1 |
Water Inlet Issue |
Dishwasher isn’t filling |
Ensure water supply is turned on and inlet valve is clean. |
| F2 |
Drainage Issue |
Dishwasher is not draining |
Clean the drain hose, pump, and filter. |
| F3 |
Heating Problem |
Dishwasher isn’t heating |
Test the heating element and thermostat. |
