What Does the IE Error on Your LG Dishwasher Mean? (And How to Fix It!)
Uh-oh! Imagine this-you’ve just loaded up your LG dishwasher with a pile of dirty dishes, and instead of hearing the soothing hum of it getting to work, an unwelcome sight greets you on the display screen: IE. What does that even mean?
No need to freak out; I got you covered! This guide will walk you through what the IE error is, what might be causing it, and how you can fix it in no time.
What does IE Error Code Mean?
IE Error Code simply means “Input Error” on an LG dishwasher. That is pretty much it-your dishwasher is not getting water inside it to do the job. Much like this, the IE code can be explained as your dishwasher telling you, “Hey, where’s all the water?
This can be due to a few different culprits which we’ll go over below, but don’t freak out! Most fixes are super simple and totally doable without having to call in a professional. Yay for saving money, right?!
Common Causes of the IE Error
Before jumping into how to solve it, first, let’s understand the possible causes you see that dreaded IE code.
Following are the most probable causes:
Water Supply Issues: The issue may be related to your water supply, the valve might have been turned off, or it has reduced pressure.
Kinked Water Hose: This is a sign of a bend or kink in the hose, which could block water from entering the dishwasher.
Clogged or Filthy Filters: Filters tend to gather grime over time; this restricts the flow of water.
Clogged or Faulty Water Inlet Valve: A clogged or faulty inlet valve simply will not open to admit the water inside.
Low Water Pressure: A reason that is least expected might be the reason for an IE error, wherein the required amount of water pressure needs to actuate your dishwasher correctly.
Faulty Sensors: The IE error sometimes-but very seldomly-appears from glitchy sensors.
Now that we know what might be causing the IE error, here comes the fun part-fixing it!
How to Fix the IE Error (Step-by-Step!)
Roll up your sleeves and grab some towels because we’re going in! Follow these steps to troubleshoot and fix your LG dishwasher’s IE error:
1. Check the Water Supply
Is the water on? It sounds simple, but it’s worth checking! Find the water supply valve-located under the sink-and make sure it’s open. Check other water fixtures in your home: are they running fine? If not, you may be dealing with a bigger plumbing issue.
2. Check the Water Hose
Check the water hose that connects your dishwasher to the water supply. Is this hose bent or kinked? Straighten it out, please; it may be hampering proper water flow. If the hose appears damaged, you may need to replace it. Pro tip: When re-installing, the hose should be as straight as possible to prevent issues later.
3. Clean the Filters
Your filters may be the unsung heroes that can save your dishwasher from an overload of gunk. Pull them out-check your user manual if you’re unsure how-and clean them using warm water and a soft scrubber. A little TLC can go a long way in restoring proper water flow.
4. Check the Water Inlet Valve
A bit more hands-on, this one is still within the realm of doable. Remove the access panel at the bottom of the dishwasher and inspect the water inlet valve for blockages or other failure modes. Clean lightly if it’s obstructed. Replace it if defective, but don’t you worry, valves are pretty inexpensive and easy to replace yourself.
5. Check for Water Pressure
Your LG dishwasher may require a minimum water pressure of about 20-80 PSI to operate. Check your house water pressure with a gauge that can be purchased from any hardware store. If the pressure is too low, you may want to call a plumber to rectify this issue.
6. Power Cycle Your Dishwasher
Sometimes, all it needs is to be reset! Switch the dishwasher off at its power source, unplug it, or turn off the breaker. Wait 5 minutes, then turn it back on again. This should clear any transient glitches that were causing the IE error.
7. Call Help if Needed
Tried all of the above steps and that annoying IE error in IE is still there? That’s okay, sometimes the problem needs a professional touch. Contact LG customer support or a professional appliance repair technician.
How to Avoid IE Error in the Future
Now that your dishwasher is up and running, here is how to avoid that annoying IE error from ever showing up again:
Clean the filters on a regular basis, at least once a month. Check your water hose for kinks or wear and tear every few months.
Never overload your dishwasher, as it may stress the water supply system.
Quick Pressure Check-When You have Low Water Flow in Your House.
When in Doubt, Keep Calm and Enjoy Coffee
As shown, fixing an IE error for some may at first seem more intimidating, but from the perspective of these steps, you are a dishwasher professional! Next time you load it up, sit back, feeling well that this little riddle-IE code-finally stopped bugging you, and in a way saved your time and money.
Got more dishwasher tips or success stories? Drop them in the comments below your fellow readers would love to hear from you! And if this guide helped fix your issue, hit that share button so others can keep their dishwashers running smoothly, too!
Now, go tackle those dishes and treat yourself to something special (like that coffee you’ve been eyeballing).
Cheers!