| E01 / H1 |
Water Inlet Fault |
Issues with water supply, inlet valve, or hose |
Check water supply, inspect inlet hose, clean inlet filter, test inlet valve |
| E02 / H2 |
Drainage Fault |
Clogged drain hose, dirty filters, faulty pump |
Clean filters, check drain hose, inspect drain pump |
| E03 / H3 |
Heating Fault |
Faulty heating element or thermostat |
Check heating element, inspect thermostat, control board issue |
| E04 / H4 |
Overflow/Leakage Fault |
Water overflow, faulty inlet valve, leaks |
Inspect for leaks, check water level sensor, verify inlet valve |
| E05 / H5 |
Motor Fault |
Issues with wash motor |
Check motor connections, test motor, inspect control module |
| E06 / H6 |
Pressure Switch Fault |
Faulty pressure switch, clogged air chamber |
Clean air chamber, test pressure switch |
| E07 / H7 |
Turbidity Sensor Fault |
Sensor malfunction, dirty sensor |
Clean sensor, replace if needed |
| E08 / H8 |
Diverter Valve Fault |
Stuck or defective diverter valve |
Inspect valve, test for power, replace if faulty |
| E09 / H9 |
Water Softener Fault |
Issue with water softener unit |
Check salt level, inspect valve |
| E10 / HA |
Circulation Pump Fault |
Faulty circulation pump |
Inspect pump, check electrical connections, replace pump |
