| E01 |
Water Inlet Fault |
Dishwasher isn’t filling |
Ensure the water supply is active and inspect the inlet valve and hose for blockages or damage. |
| E02 |
Drainage Fault |
Water isn’t draining |
Clear any clogs from the filter, drain hose, and pump to restore proper drainage. |
| E03 |
Heating Fault |
Water isn’t heating |
Verify the functionality of the heating element and thermostat, replacing if necessary. |
| E04 |
Overfill/Leakage |
Too much water or a leak detected |
Examine the water level sensor, inlet valve, and hoses for signs of leaks or malfunctions. |
| E05 |
Motor Fault |
Issue with wash motor |
Check the motor for operational issues and replace it if found defective. |
| E06 |
Pressure Switch Fault |
Water level detection issue |
Test the pressure switch for accuracy and replace if it’s not functioning properly. |
| E07 |
Turbidity Sensor Fault |
Water clarity sensor issue |
Clean the turbidity sensor thoroughly or install a new one if it’s defective. |
| E08 |
Diverter Valve Fault |
Water not reaching spray arms |
Inspect the diverter valve for issues and replace it if it’s malfunctioning. |
| E09 |
Heating System Fault |
Dishwasher isn’t heating |
Check the heating element and ensure all wiring connections are intact and secure. |
| E10 |
Circulation Pump Fault |
Pump not operating properly |
Assess the circulation pump for obstructions or damage, cleaning or replacing as needed. |
| E11 |
Drying System Fault |
Dishwasher isn’t drying properly |
Review the drying fan, heating component, and ventilation system to identify any issues. |
| E15 |
Leakage Detected |
Water leaked into the base |
Inspect all hoses, seals, and the inlet valve for potential leaks and address accordingly. |
| E22 |
Blocked Filter/Spray Arm |
Filter or spray arm clogged |
Remove and clean the filter thoroughly, ensuring spray arm holes are free from debris. |
| E24 |
Drainage Problem |
Water not draining |
Inspect the drain hose and filter, clearing any blockages that hinder water flow. |
| E25 |
Drain Pump Problem |
Drain pump malfunction |
Check the drain pump for obstructions, clean it, and replace if it fails to function properly. |
| E30 |
Water Level Sensor Issue |
Incorrect water level readings |
Examine and clean the water level sensor or replace it if it shows signs of failure. |
